Change Log#

v2.9.5 - March 2026#

* ADDED: LINUS Control now supports the new LINUS V-Series amps LINUS V908 and LINUS V1804
* ADDED: LINUS Control now support the new cardioid line array ViFORCE and cardioid subwoofer SUB FORCE 35
* ADDED: LINUS Control now shows the sum of all tuning applied to a speaker, when selecting an amplifier on the Tune page
ADDED: Additional Minimum Latency presets for CiRAY, ViRAY, APS-Pro, HOPS10-Pro, CUE ONE, CUE TWO, CUE FOUR
ADDED: The Amps page now shows the amplifier’s serial number
ADDED: Error reporting for LINUS6.4 and LINUS V amps
ADDED: Alt + Click shortcut to patch routing diagonally
FIXED: LINUS Control now locks LINUS6.4 and LINUS V amps correctly with Hardware & Unit lock
FIXED: Changing the fallback routing would try to recover the primary signal
FIXED: The speaker list did not show the selected speaker when a previous selection was aborted
FIXED: The grid on the Setup page had gaps at certain zoom levels
* CHANGED: When changing presets LINUS Control now asks whether assigned tuning should be kept or bypassed
* CHANGED: LINUS Control now supports flexible Dante routing and summing of Dante channels
* CHANGED: Improved Metering: Input meters on the Monitor page now show headroom regardless of input type
CHANGED: The Monitor page now shows only one input & output meter for bridged channel pairs
CHANGED: The ‘Add Speaker’ Button on the setup page now stays visible on the left for easy access in large projects

* ADDED: Configure the subnet mask for LINUS6.4 in LINUS Control on the Amps page
FIXED: LINUS6.4 firmware v3.10 would not initialize the Analog inputs correctly when restoring power, leading to no audio output and “Amp Off” & Limiters shown on screen
FIXED: The WiFi hotspot in LINUS6.4 would sometimes stop working after a couple of days
FIXED: LINUS6.4 Mute status in LINUS Control is now in sync with the Mute button of the amplifier
FIXED: The PEQ type drop down in the Tuning view for PEQ 6&7 would sometimes be hidden by other UI elements

* ADDED: The LINUS6.4 App can now Save & Load Snapshots on LINUS6.4
* ADDED: The App now allows changing the subnet mask in the network settings
* ADDED: Verify and test Fallback routing by switching between Digital & Analog:

LINUS Control and the LINUS6.4 App now keep analog and fallback routing identical when switching input type.
FIXED: In rare cases, the State could be too large to be saved on the network
FIXED: LINUS6.4 firmware v3.00 would not restore Bridge mode on channels 3+4 correctly when booting

* ADDED: The new LINUS6.4 App offers wireless control over the amplifier from any mobile device
* ADDED: Save Project Notes and information about the Show and Venue in your LINUS Control project file
ADDED: Routing: Patch / Unpatch Columns using Shift
FIXED: Workspace: When adding a Group, the name no longer gets overwritten by default text
FIXED: Workspace: It is no longer possible to “Identify” offline amps
FIXED: LINUS6.4: The display would stay black on reboot in rare occasions if all input routing was unpatched
CHANGED: Routing: Analog & Fallback Routing stay constant when switching between Analog and Digital inputs
CHANGED: Amps Page: Lock icons changed for clarity
CHANGED: Tuning: Add second decimal place to Delay field, for improved precision
CHANGED: LINUS6.4: New Limiter DSP architecture for more transparent operation

ADDED: LINUS6.4: N-RAY and KTV Soundbar speakers are now available for the LINUS6.4
ADDED: Workspace: Bridged Icon at loudspeaker banner is shown if a bridged preset is selected for LINUS6.4
FIXED: LINUS6.4: Prevent processor freeze at quick reboot
FIXED: LINUS6.4: AES clock lock improvements
CHANGED: LINUS6.4: Updated limiter performance
CHANGED: LINUS6.4: Highpass at 10Hz to avoid triggering DC Protect
CHANGED: LINUS6.4: “DC Error” shown in display when there is a fault condition

* ADDED: Global Standby: Amplifiers which are suited with the standby feature can now be switched globally into standby or woken up. This feature is located in the “AMPS” view.
ADDED: LINUS6.4: Display: Indicate Power Off while device is shutting down
FIXED: LINUS Control is now fully compatible with the Windows 11 Version 24H2
FIXED: LINUS12C: Device MAC address stays constant between reboots
FIXED: LINUS6.4: Fix firmware hangup that could occur in rare cases
FIXED: LINUS6.4: Display: Fix text overlapping icons
CHANGED: Limiter meter indication of modules and in monitor view has been improved.

Logic for modules:

Gain reduction under 3dB no visual indication

Gain reduction over 3dB orange meter indication

Logic for monitor view:

Gain reduction always indicated in orange and with improved scale
CHANGED: LINUS6.4: All speaker settings for LINUS6.4 have optimised limiter operation which ensure best system performance and protection
CHANGED: LINUS6.4: Display: Limiter meters show orange when gain reduction is ≥ 3dB and red when gain reduction reaches 10dB